Used hood vent pair on eBay
Genuine 2014 2017 Jaguar F Type Left Shinny Black Hood Louvres Vent Grill | eBay
Someone can offer him $100 pr, prolly.
Someone can offer him $100 pr, prolly.
Nati, the ones on your link are the "R" and black pack style louvers for rear wheel drive cars.
If any one is interested, I have an extra set that are in brand new condition.
Trending Topics
Mask with painter's tape?
Genuine 2014 2017 Jaguar F Type Left Shinny Black Hood Louvres Vent Grill | eBay
Someone can offer him $100 pr, prolly.
Someone can offer him $100 pr, prolly.
BTW - Jag P/N can clearly be seen in 4th photo...
$69 was for one. I believe Polaris was suggesting $100 for the pair.
I forgot to make clear that I have the R hump type HL now. My preference are the contoured mesh type, but not in black. I want the HL to be more inconspicuous and color coded to the hood like the 2016/17 cars are now doing with the integrated square louvers. The latest louvers do a far better job of allowing the cars lines speak for themselves and not be visually interrupted with a garish hump or shiny black plastic.
Since my side vents are now white with a black mesh, it only stands to reason that the HL should follow that same theme.
If you look closely at the HL in question, to customize a white louver with a black mesh would be extremely difficult to pull off without having the piece look like it was painted in my garage because of the way the mesh overlaps the base. To simply tape off the mesh part would still leave about a half inch of mesh painted, which would look like crap.
Prolly just not worth the effort at the end of the day. I'm kinda digging how my venting is looking now. Here's a comparison.
See how needlessly busy the black venting is on a white car?
Since my side vents are now white with a black mesh, it only stands to reason that the HL should follow that same theme.
If you look closely at the HL in question, to customize a white louver with a black mesh would be extremely difficult to pull off without having the piece look like it was painted in my garage because of the way the mesh overlaps the base. To simply tape off the mesh part would still leave about a half inch of mesh painted, which would look like crap.
Prolly just not worth the effort at the end of the day. I'm kinda digging how my venting is looking now. Here's a comparison.
See how needlessly busy the black venting is on a white car?
Last edited by polarisnavyxj; Sep 11, 2016 at 02:57 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Peter Langan
S-Type / S type R Supercharged V8 ( X200 )
26
Apr 6, 2016 01:42 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)







