2002 X-type 2.5 manual Trans Cranks but no Start.
Thread Starter
|
Member
Joined: Jun 2019
Posts: 36
Likes: 0
From: Wy
2002 X-type 2.5 manual Trans Cranks but no Start.
Hi there new member here my name is Adam from Wyoming.
Car is 02 x type 2.5 170k miles. Just got the car and po said drove to work then when she got off the car wouldn't start. Ford dealership says it jumped time. Pecus error e and p1637 and dsc failure are codes. Tried starting fluid no luck. Going to try to check compression after work. Do these cars have timing issues? It doesn't seem right that it would jump time trying to start it after it ran fine.
Anyways thanks and nice to meet y'all
Adam
Car is 02 x type 2.5 170k miles. Just got the car and po said drove to work then when she got off the car wouldn't start. Ford dealership says it jumped time. Pecus error e and p1637 and dsc failure are codes. Tried starting fluid no luck. Going to try to check compression after work. Do these cars have timing issues? It doesn't seem right that it would jump time trying to start it after it ran fine.
Anyways thanks and nice to meet y'all
Adam
Veteran Member
Joined: Mar 2014
Posts: 26,755
Likes: 10,299
From: Tehama County, California, USA
Hello, Adam,
I'm sorry your Jaguar won't start. Members in our X-type section will certainly be able to help you with that.
Welcome to the forums from ElinorB.
(';')
I'm sorry your Jaguar won't start. Members in our X-type section will certainly be able to help you with that.
Welcome to the forums from ElinorB.
(';')
Joined: Dec 2011
Posts: 120,439
Likes: 17,008
From: Durham, UK
Welcome to the forums Adam,
Good to have you with us.
I can see you've already found your way to the X-Type forum with this issue so there's no need for a link to it from me. The 'HOW TO' thread at the top is a good place to start for information on regular issues.
Please add vehicle details to your Signature to help others to give relevant advice. Go to the User CP button on the left of the top menu bar, then Settings & Options under Your Control Panel. Select Edit Signature and enter the details.
You can also visit the US Central Region forum by following this link https://www.jaguarforums.com/forum/us-central-36/ to find other members in your region.
Enjoy the forums.
Graham
Good to have you with us.
I can see you've already found your way to the X-Type forum with this issue so there's no need for a link to it from me. The 'HOW TO' thread at the top is a good place to start for information on regular issues.
Please add vehicle details to your Signature to help others to give relevant advice. Go to the User CP button on the left of the top menu bar, then Settings & Options under Your Control Panel. Select Edit Signature and enter the details.
You can also visit the US Central Region forum by following this link https://www.jaguarforums.com/forum/us-central-36/ to find other members in your region.
Enjoy the forums.
Graham
Joined: Oct 2007
Posts: 121,060
Likes: 6,652
From: PHX some of the time
Welcome to Jaguar Forums Adam,
Good to have you with us.
Enjoy the forum.
If you haven't done so already you should add your car details to your signature to help others to help you.
If you need help with getting around and using the forum follow this link for some help Forum Help
Good to have you with us.
Enjoy the forum.
If you haven't done so already you should add your car details to your signature to help others to help you.
If you need help with getting around and using the forum follow this link for some help Forum Help
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Adam Benton
X-Type ( X400 )
40
Jun 29, 2019 01:02 AM
pete_185
XJ XJ6 / XJ8 / XJR ( X350 & X358 )
24
Feb 19, 2018 08:50 AM
Mike Leon
General Tech Help
0
Oct 7, 2017 05:24 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)