New s--type v8 owner
Hi Guy's, Got this 04 s-type last Nov. I get bonging alarm in 5 sequence, no visual on dash, and small light on passenger airbag stays on. Any ideas to rectify?
Welcome to the forum Eddwynn,
Good to have you with us at Jaguar forums. Sounds like passenger seat occupant sensor could be signalling to RCM (Restraint Control Module) passenger seat is occupied when it is empty.
Follow this link https://www.jaguarforums.com/forum/s...ed-v8-x200-15/ to the S-Type forum for help, advice and information. The 'HOW TO' thread at the top is a good place to start for information on regular issues.
Please add vehicle details to your Signature to help others to give relevant advice. Go to the User CP button on the left of the top menu bar, then Settings & Options under Your Control Panel. Select Edit Signature and enter the details.
You can also visit the UK & Eire Region forum by following this link https://www.jaguarforums.com/forum/uk-eire-68/ to find other members in your region.
Enjoy the forums.
Good to have you with us at Jaguar forums. Sounds like passenger seat occupant sensor could be signalling to RCM (Restraint Control Module) passenger seat is occupied when it is empty.
Follow this link https://www.jaguarforums.com/forum/s...ed-v8-x200-15/ to the S-Type forum for help, advice and information. The 'HOW TO' thread at the top is a good place to start for information on regular issues.
Please add vehicle details to your Signature to help others to give relevant advice. Go to the User CP button on the left of the top menu bar, then Settings & Options under Your Control Panel. Select Edit Signature and enter the details.
You can also visit the UK & Eire Region forum by following this link https://www.jaguarforums.com/forum/uk-eire-68/ to find other members in your region.
Enjoy the forums.
From one S-type owner to another... Welcome. The S-type forum is populated with a very friendly group and contains a wealth of knowledge.
With a steady lamp illumination and no flashing codes, the use of a diagnostic reader may be required. Either dealer level diagnostics or an iCarsoft i930 unit would be able to pull up your fault codes. That said, You might want to check under the seat and make sure the connector to the airbag sensor has not come undone. If I recall correctly, the connector the for airbag system has yellow wires attached to it.
With a steady lamp illumination and no flashing codes, the use of a diagnostic reader may be required. Either dealer level diagnostics or an iCarsoft i930 unit would be able to pull up your fault codes. That said, You might want to check under the seat and make sure the connector to the airbag sensor has not come undone. If I recall correctly, the connector the for airbag system has yellow wires attached to it.
Welcome to Jaguar Forums Eddwynn,
Good to have you with us.
Enjoy the forum.
If you haven't done so already you should add your car details to your signature to help others to help you.
If you need help with getting around and using the forum follow this link for some help Forum Help
Good to have you with us.
Enjoy the forum.
If you haven't done so already you should add your car details to your signature to help others to help you.
If you need help with getting around and using the forum follow this link for some help Forum Help
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Edward_Woodward
New Member Area - Intro a MUST
9
Feb 8, 2023 07:18 PM
chiliv6
New Member Area - Intro a MUST
9
Jan 7, 2011 05:31 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)


















