I had to replace the driver's side arm after it tangled with the other one and the mounting hole got reamed out by the drive shaft. I bought an exact replacement, but it didn't come with the spray hose and nozzle. Is there a way to remove the old set so it can be transferred to the new arm? There are no visible clips or screws that secure it to the arm.

 

Welcome to the forums.

 

Welcome to the forum Gnick,

Good to have you with us at Jaguar forums.

The screenwash jet assembly is listed as separately available in the parts catalogue so it must come off.

Follow this link https://www.jaguarforums.com/forum/xk8-xkr-x100-17/ to the XK8/XKR forum for help, advice and information. The 'HOW TO' thread at the top is a good place to start for information on regular issues.

Please remember to add vehicle details to your Signature to help others to give relevant advice. Go to the User CP button on the left of the top menu bar, then Settings & Options under Your Control Panel. Select Edit Signature and enter the details.

You can also visit the US Southwest Region forum by following this link https://www.jaguarforums.com/forum/us-southwest-37/ to find other members in your region.

Enjoy the forums.

Graham

 

 

Welcome aboard Gary.

 

Hello, Gnick,
I hope you get that washer fixed to your satisfaction. My car is far too old (read, simple) to have such comppliated things so I can't help you with it.

Welcome to the forums from ElinorB.
(';')

 

Welcome.

Plastic being plastic, good luck.

 

Welcome to Jaguar Forums Gnick,

Good to have you with us.
Enjoy the forum.

If you haven't done so already you should add your car details to your signature to help others to help you.
If you need help with getting around and using the forum follow this link for some help Forum Help