Rear upper ball joint
#1
07-26-2017, 12:49 PM
Join Date: Jul 2017
Location: Halifax
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
#2
07-26-2017, 10:46 PM
#3
07-27-2017, 01:34 AM
Join Date: Mar 2015
Location: Dural, Northwest Sydney. Australia.
Posts: 38,942
Received 3,817 Likes
on
2,791 Posts
#4
07-27-2017, 01:38 AM
Veteran Member
Join Date: Mar 2014
Location: Tehama County, California, USA
Posts: 25,191
Received 8,956 Likes
on
5,298 Posts
#5
07-27-2017, 04:30 AM
Join Date: Oct 2007
Location: PHX some of the time
Posts: 116,752
Received 6,253 Likes
on
5,453 Posts
Welcome to Jaguar Forums Gareth,
Good to have you with us.
You will get a better response if you ask in the tech section https://www.jaguarforums.com/forum/xf-xfr-x250-44/
Enjoy the forum.
If you haven't done so already you should add your car details to your signature to help others to help you.
If you need help with getting around and using the forum follow this link for some help Forum Help
Good to have you with us.
You will get a better response if you ask in the tech section https://www.jaguarforums.com/forum/xf-xfr-x250-44/
Enjoy the forum.
If you haven't done so already you should add your car details to your signature to help others to help you.
If you need help with getting around and using the forum follow this link for some help Forum Help
#6
07-27-2017, 05:02 AM
Join Date: Jan 2014
Location: Delaneys Creek,Qld. Australia
Posts: 28,379
Received 6,317 Likes
on
4,367 Posts
#7
07-27-2017, 06:32 AM
Join Date: Apr 2012
Location: Summerville, South Carolina
Posts: 24,363
Received 4,182 Likes
on
3,645 Posts
Trending Topics
#8
07-27-2017, 09:39 AM
Welcome to the forum Garethperrett,
Good to have you with us at Jaguar forums.
A Jaguar Dealer will only supply and fit a complete upper wishbone. They will not replace bushes or ball joints in aluminium wishbones. However, the parts are available if you choose to use an Independent or DIY. The rear suspension on your XF is similar to that on my XK. When faced with the same issue last year, I examined the wishbone and chose to replace rather than refurbish it. Steel sleeved bushes and ball joints have a reaction with aluminium over the years which can sometimes make repair unadvisable.
Follow this link https://www.jaguarforums.com/forum/xf-xfr-x250-44/ to the X250 forum for help, advice and information.
Please remember to add vehicle details to your Signature to help others to give relevant advice. Go to the User CP button on the left of the top menu bar, then Settings & Options under Your Control Panel. Select Edit Signature and enter the details.
You can also visit the UK & Eire Region forum by following this link https://www.jaguarforums.com/forum/uk-eire-68/ to find other members in your region.
Enjoy the forums.
Graham
Good to have you with us at Jaguar forums.
A Jaguar Dealer will only supply and fit a complete upper wishbone. They will not replace bushes or ball joints in aluminium wishbones. However, the parts are available if you choose to use an Independent or DIY. The rear suspension on your XF is similar to that on my XK. When faced with the same issue last year, I examined the wishbone and chose to replace rather than refurbish it. Steel sleeved bushes and ball joints have a reaction with aluminium over the years which can sometimes make repair unadvisable.
Follow this link https://www.jaguarforums.com/forum/xf-xfr-x250-44/ to the X250 forum for help, advice and information.
Please remember to add vehicle details to your Signature to help others to give relevant advice. Go to the User CP button on the left of the top menu bar, then Settings & Options under Your Control Panel. Select Edit Signature and enter the details.
You can also visit the UK & Eire Region forum by following this link https://www.jaguarforums.com/forum/uk-eire-68/ to find other members in your region.
Enjoy the forums.
Graham
#9
07-27-2017, 02:19 PM
Join Date: Jul 2017
Location: Halifax
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
lsp
XJ XJ6 / XJ8 / XJR ( X350 & X358 )
2
10-08-2016 05:09 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)