S Type Suspension Explained in Video! FAQ
#1
S Type Suspension Explained in Video! FAQ
Check out Sam's 10 minute video where he explains the details of a Jag S type front and rear suspension, what goes wrong and how to fix it.
How To Check Jaguar S Type For Clunks, Rattles, Noises - YouTube
How To Check Jaguar S Type For Clunks, Rattles, Noises - YouTube
The following 20 users liked this post by maxthrottle:
Bad Cattitude (11-09-2012),
Constantin FABRIKEZIS (08-24-2017),
davidladewig (02-03-2017),
DougB (07-11-2012),
FunJag (12-10-2012),
and 15 others liked this post.
#2
The following 2 users liked this post by Jon89:
LeapingCat (07-27-2016),
luckyfist (02-14-2013)
#3
Join Date: Nov 2006
Location: Glasgow, Scotland UK
Posts: 47,303
Received 9,005 Likes
on
4,113 Posts
#6
You can get new ball joints (Ebay) and have your local shop press out the old ones and press in the new replacements, saving you $$$.
#7
If this source works out this is a great piece of info have here!!
Trending Topics
#8
Just remember that lower ball joints are only available for the Lincoln LS and the early 1999-2002 S Type. Also you need to know if your car has 14mm or 16mm ball joints. This refers to the stud diameter which was increased sometime in the 2002 model year.
Hopefully the upper ball joints for the early cars and ANY ball joints for the 2003 and up S Type will someday be released.
.
.
.
Hopefully the upper ball joints for the early cars and ANY ball joints for the 2003 and up S Type will someday be released.
.
.
.
#9
Wait... so can I get lower ball joints for my front lower controls arms? (03 str)
Can they be pressed in or out?
Do I have to buy a complete spindle assembly in order to replace my lower ball joints?
I have a steering wheel shimmy at 45mph that I haven't been able to cure, worse under braking,
I think lower ball joint's are next to do, because ive tried a few things already,
Can they be pressed in or out?
Do I have to buy a complete spindle assembly in order to replace my lower ball joints?
I have a steering wheel shimmy at 45mph that I haven't been able to cure, worse under braking,
I think lower ball joint's are next to do, because ive tried a few things already,
#11
Just remember that lower ball joints are only available for the Lincoln LS and the early 1999-2002 S Type. Also you need to know if your car has 14mm or 16mm ball joints. This refers to the stud diameter which was increased sometime in the 2002 model year.
Hopefully the upper ball joints for the early cars and ANY ball joints for the 2003 and up S Type will someday be released.
.
.
.
Hopefully the upper ball joints for the early cars and ANY ball joints for the 2003 and up S Type will someday be released.
.
.
.
s types at partsgeek
If you google for the ball joint with year you get to the right page.
Last edited by Ducmon; 07-19-2016 at 11:09 AM. Reason: Wrong spelling
The following users liked this post:
rosskell (12-28-2016)
#13
#14
I decided to get the entire knuckle. The original parts aren't that good and all the rubber was gone on the lower BJ and the Upper control arm, so I am replacing all of it. Great video
Thread
Thread Starter
Forum
Replies
Last Post
Fraser Mitchell
XJ XJ6 / XJ8 / XJR ( X350 & X358 )
9
10-01-2015 04:06 AM
rudelover2
XJ XJ6 / XJ8 / XJR ( X350 & X358 )
4
09-11-2015 08:53 PM
MC36
US Lower Atlantic
0
09-01-2015 07:34 PM
stanjag
S-Type / S type R Supercharged V8 ( X200 )
2
08-30-2015 10:35 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)