X-Type ( X400 ) 2001 - 2009
Sponsored by:
Sponsored by:

no fuel pressure

Thread Tools
 
Search this Thread
 
Old Dec 20, 2010 | 02:33 PM
  #1  
wjd03's Avatar
Thread Starter
|
Member
Joined: Dec 2010
Posts: 64
Likes: 1
From: virginia USA
Default no fuel pressure

I have put a pressure guage on the fuel rail, no pressure. Before I go into the fuel tank, i want to ,make sure the inertia switch has not popped. I have a 99 xk8. It will start with startewr fluid but thats it. I pulled the passenger plastic trim (right of the feet) but cant find the switch......please help. Been reading this forum all day
 
Reply
Old Dec 20, 2010 | 02:36 PM
  #2  
sidewalkman's Avatar
Veteran Member
Joined: Nov 2009
Posts: 1,010
Likes: 55
From: Langley, BC
Default

it's a little button, should be right there under the kick panel, I think when tripped it pops all the way out and you push it back in.
 
Reply
Old Dec 20, 2010 | 03:05 PM
  #3  
wjd03's Avatar
Thread Starter
|
Member
Joined: Dec 2010
Posts: 64
Likes: 1
From: virginia USA
Default re

I still cant find it. On the side , I see 5 connectors, and further nto the back of the panel I see more connectors and directly above is the heater motor. Can you be more specific?
 
Reply
Old Dec 20, 2010 | 03:07 PM
  #4  
sidewalkman's Avatar
Veteran Member
Joined: Nov 2009
Posts: 1,010
Likes: 55
From: Langley, BC
Default

On the passenger side, you remove the rubber from the door and then take off the kick panel. I think there are 2 screws. I think the button is closer to the door end than the firewall end.
 
Reply
Old Dec 20, 2010 | 03:26 PM
  #5  
wjd03's Avatar
Thread Starter
|
Member
Joined: Dec 2010
Posts: 64
Likes: 1
From: virginia USA
Default re

you lost me man. I have the kick panerl off. no door rubber to trmove. Maybe we are talking about a different location. Is it in the door? I thought it would be behind the kick panel.
 
Reply
Old Dec 20, 2010 | 03:29 PM
  #6  
wjd03's Avatar
Thread Starter
|
Member
Joined: Dec 2010
Posts: 64
Likes: 1
From: virginia USA
Default

i will now pull out my few remaining hairs
 
Reply
Old Dec 20, 2010 | 03:34 PM
  #7  
wjd03's Avatar
Thread Starter
|
Member
Joined: Dec 2010
Posts: 64
Likes: 1
From: virginia USA
Default

did i mention its really cold (LOL)
 
Reply
Old Dec 20, 2010 | 04:39 PM
  #8  
Alfadude's Avatar
Veteran Member
Joined: Feb 2009
Posts: 2,081
Likes: 304
From: Milwaukee, Wisconsin, USA
Default

This is the X-TYPE forun, not the XK forum. I think that is where the disconnect is in trying to find the inertia switch.Repost your question there you'll probably have more luck.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
toronadomike
XK8 / XKR ( X100 )
69
Jan 22, 2026 10:13 PM
silkcat
X-Type ( X400 )
15
Jan 18, 2025 04:29 AM
dsnyder586
XJ XJ8 / XJR ( X308 )
56
Dec 29, 2024 07:39 PM
Papelione
XJ XJ6 / XJR6 ( X300 )
16
Sep 21, 2015 06:13 PM
ccfulton
XK8 / XKR ( X100 )
4
Sep 20, 2015 05:15 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 08:56 AM.