Just recently pulled and replaced my injectors on the driver side of my 2010 XFR. Pulled the coolant expansion tank off. After putting it back together I have a stray bolt and nut combo. Any ideas as to where it goes?

 

yea just dump it into the oil fill opening and you should be good

nah jk dunno man
wierd that you'd have something left over

 

The parts manual lists a M8 x 80mm( about 3.25in long) stud for the fuel rail to head fastener. There is no picture showing where.

 

Seems like it might’ve come from around there but it has 4-10mm holding it down. Not sure if that’s what you’re talking about.

 

This one is exactly 80mm. It’s got about a 2.5 inch shank. Can you drop the parts manual if you have it?

 

I took several things off in order to get to the injectors. I labeled each bag. It was in a bag labeled coolant reservoir but couldn’t find where it went.

 

Also pulled this off and haven’t put it back on because I haven’t got to the other side yet.

 

Go to the X350/X358 forum, in the Sticky Threads is "X350/X358 How To quick links", in the first post you will find Jaguar Electronic Parts Catalogue full download and install instructions.