Jaguar Forums - Jaguar Enthusiasts Forum
  • LOG IN
  • REGISTER
  • Forums
    • General Jaguar Forums
      • New Member Area - Intro a MUST
      • Jaguar Forums Feedback & Suggestion Center
      • General Tech Help
    • Jaguar Models ( Current )
      • XF (X260)
      • F-Type ( X152 )
      • XE ( X760 )
      • E-Pace
      • F-Pace (X761) / C-X17
      • I-Pace EV
    • Jaguar Models ( Modern )
      • XF and XFR ( X250 )
      • XJ ( X351 )
      • X-Type ( X400 )
      • S-Type / S type R Supercharged V8 ( X200 )
      • XJ XJ6 / XJ8 / XJR ( X350 & X358 )
      • XJ XJ8 / XJR ( X308 )
      • XJ XJ12 ( X305 )
      • XJ XJ6 / XJR6 ( X300 )
      • XK8 / XKR ( X100 )
      • XK / XKR ( X150 )
    • Jaguar Models ( Classics )
      • Mark V - X 420G
      • MKI / MKII S type 240 340 & Daimler
      • XK120 XK140 XK150
      • E type ( XK-E )
      • XJ6 & XJ12 Series I, II & III
      • XJS ( X27 )
      • XJ40 ( XJ81 )
      • XKSS
      • XJ220
    • Other Jaguars
      • Other Jaguar Models / Concepts / Replicas
    • Diesel variants
      • Diesel variants - All models
    • Non Jaguar vehicles
      • Non-Jaguar Vehicles
    • Brand Review
      • Jaguar Press release
      • Jaguar Customer Relationship Centre
      • Jaguar Engines & transmissions
      • Wheels / Tires, Suspension & handling
      • Interior
      • Exterior
      • Audio/Visual Electronics
      • Detailing / Car care
      • Motorsports
    • Jaguar Classifieds
      • Marketplace
      • PRIVATE For Sale / Trade or Buy Classifieds
      • VENDOR 'For Sale' Classifieds
    • Regional
      • US Northeast
      • US Central
      • US Southwest
      • US Western
      • US Northwest
      • US Midwest
      • US Mid Atlantic
      • US Lower Atlantic
      • US Southern Midwest
      • Canada
      • Mexico, South America
      • UK & Eire
      • Europe
      • Australia - Queensland
      • Australia - New South Wales / ACT
      • Australia - Victoria / Tasmania
      • Australia - Western
      • Australia - South / NT
      • New Zealand
      • Other Areas
    • Official Site Sponsors
      • VENDOR Threads
    • General Interest / History
      • Sights N Sounds
      • Photography
      • Forum announcement archives / Forum History
      • Jaguarforums Merchandise
      • Memorial Section
  • News
  • Marketplace
    • Vendor Directory
    • Become a Vendor
    • Member Marketplace
    • Vendor Marketplace
    • Site Store
  • New Posts
  • Tools
    • Car Payment Calculator
    • Tire Rim Calculator
    • Vin Decoder
    • Recalls
    • Technical Service Bulletins (TSBs)
    • Members List
    • Live Feed
  • Gallery
  • View Dark Mode
    • Please register or login to enable Dark Mode.
  • Log In
  • Register
Jaguar Forums - Jaguar Enthusiasts Forum
    • Threads
      • Advanced
Dark Mode

Please register or login to enable Dark Mode.

Log In

Forgot your Password?

By logging into your account, you agree to our Terms of Use and Privacy Policy, and to the use of cookies as described therein.
or
 
  • Recent
  • Commented
  • Albums
  • My Pictures

Peter_of_Australia's Photos

View Profile
Sort:
Commented
  • Most Recent
  • Most Comments
  • Albums
  • Photos
And you see the P/Ns of the other 2 gaskets in the picture here.
And you see the P/Ns of the other 2 gaskets in the picture here.
0 2022/10/04 05:09:16 Peter_of_A
I used the mirror and this special tool to pick that gasket (XR85431) out of there and replaced it with a new one. Btw.: see that big oval hole, which is revealed after removing the cover-plate - I replaced that gasket as well: It was very hard to find that P/N. A nice guy from Jagdaim helped me on the phone. The P/N is AJ88279.
I used the mirror and this special tool to pick that gasket (XR85431) out of there and replaced it with a new one. Btw.: see that big oval hole, which is revealed after removing the cover-plate - I replaced that gasket as well: It was very hard to find that P/N. A nice guy from Jagdaim helped me on the phone. The P/N is AJ88279.
0 2022/10/04 05:09:11 Peter_of_A
The round thing is a mirror, which I used to see the rotten gasket in there.
The round thing is a mirror, which I used to see the rotten gasket in there.
0 2022/10/04 05:09:08 Peter_of_A
Thus I got the second part off as well, but it was not possible to pull this part out of the engine block, nor could I turn it.
Thus I got the second part off as well, but it was not possible to pull this part out of the engine block, nor could I turn it.
0 2022/10/04 05:09:05 Peter_of_A
And a similar part sits right under this previous part... I guess normally you would be expected to remove the upper left engine block down to the head-gasket, just to be able to remove the second bolt there...!But I just managed to use a standard spanner - painful and time-consuming, but it beats the alternative.
And a similar part sits right under this previous part... I guess normally you would be expected to remove the upper left engine block down to the head-gasket, just to be able to remove the second bolt there...!But I just managed to use a standard spanner - painful and time-consuming, but it beats the alternative.
0 2022/10/04 05:09:02 Peter_of_A
This is the part I am talking about and it has 2 bad gaskets.
This is the part I am talking about and it has 2 bad gaskets.
0 2022/10/04 05:08:59 Peter_of_A
After removing a whole lot of parts (incl. air-intake and fuel-injection-unit) you get access to that upper hose-flange-bit, which is screwed onto the engine block...
After removing a whole lot of parts (incl. air-intake and fuel-injection-unit) you get access to that upper hose-flange-bit, which is screwed onto the engine block...
0 2022/10/04 05:08:55 Peter_of_A
New water pump with new back-plate assembled already.
New water pump with new back-plate assembled already.
0 2022/10/04 04:52:43 Peter_of_A
The old rotten back-plate, and the new one, which is kind of not purchasable anywhere - I was just lucky.
The old rotten back-plate, and the new one, which is kind of not purchasable anywhere - I was just lucky.
0 2022/10/04 04:52:41 Peter_of_A
That flange for the hose was actually corroded thru at one point: A complete hole thru the material.
That flange for the hose was actually corroded thru at one point: A complete hole thru the material.
0 2022/10/04 04:52:37 Peter_of_A
The water-pump... Not the most pretty sight....
The water-pump... Not the most pretty sight....
0 2022/10/04 04:52:32 Peter_of_A
The old seals: black. The replacement I found: green.
The old seals: black. The replacement I found: green.
0 2022/10/04 04:28:39 Peter_of_A
hose JLM21497 at bottom of expansion tank - now with 2 of those green seals (see next picture)
hose JLM21497 at bottom of expansion tank - now with 2 of those green seals (see next picture)
0 2022/10/04 04:28:34 Peter_of_A
And a shiny air-intake to crown it all. I cleaned the part with wire-brushes of all kind and covered it with clear-coat (=better then new).
And a shiny air-intake to crown it all. I cleaned the part with wire-brushes of all kind and covered it with clear-coat (=better then new).
0 2022/10/02 03:54:20 Peter_of_A
New upper & lower seals in injector-unit. New cam covers fitted.
New upper & lower seals in injector-unit. New cam covers fitted.
0 2022/10/02 03:54:17 Peter_of_A
Engine block after cleaning. I had to rub off a lot of "magnesium-paste" off the cams: All that "liquified" magnesium, which came off the cam covers.
Engine block after cleaning. I had to rub off a lot of "magnesium-paste" off the cams: All that "liquified" magnesium, which came off the cam covers.
0 2022/10/02 03:54:15 Peter_of_A
...here you see the thread.
...here you see the thread.
0 2022/10/02 03:54:12 Peter_of_A
And another challenge on the left cam-cover as well: This breather hose also needs to be re-planted to the new cover: Carfully lift that little latch with a screwdriver and turn the whole thing anti-clockwise...
And another challenge on the left cam-cover as well: This breather hose also needs to be re-planted to the new cover: Carfully lift that little latch with a screwdriver and turn the whole thing anti-clockwise...
0 2022/10/02 03:54:10 Peter_of_A
...and this is how to replant this breather hose: Carefully from underneath (after unscrewing a metal cover) you need to carefully press all 4 clips in simulaneoulsly to avoid damaging the breather.
...and this is how to replant this breather hose: Carefully from underneath (after unscrewing a metal cover) you need to carefully press all 4 clips in simulaneoulsly to avoid damaging the breather.
0 2022/10/02 03:50:28 Peter_of_A
Old and new right cam cover: the breather hose needs to be "re-planted"...
Old and new right cam cover: the breather hose needs to be "re-planted"...
0 2022/10/02 03:50:24 Peter_of_A
This shows the worst of the galvanic corrosion self-destruction
This shows the worst of the galvanic corrosion self-destruction
0 2022/10/02 03:50:21 Peter_of_A
The the engine block looked really sad.
The the engine block looked really sad.
0 2022/10/02 03:46:41 Peter_of_A
So this is how bad it was: Oil leaking left, right and centre. Spark plugs and ignition coils drowning.
So this is how bad it was: Oil leaking left, right and centre. Spark plugs and ignition coils drowning.
0 2022/10/02 03:46:38 Peter_of_A
same on the left cam cover
same on the left cam cover
0 2022/08/18 01:58:08 Peter_of_A
cam cover right S-Type V6 3L extreme corrosion
cam cover right S-Type V6 3L extreme corrosion
0 2022/08/18 01:54:08 Peter_of_A
0 2022/08/13 06:21:00 Peter_of_A
That's part of my collection: Identical S-Type in front and back, plus Sovereign XJ8 (left) and X-Type (right), and a '97 Ford Fairlane (red)
That's part of my collection: Identical S-Type in front and back, plus Sovereign XJ8 (left) and X-Type (right), and a '97 Ford Fairlane (red)
0 2022/08/13 06:00:08 Peter_of_A
 
First
Page
24 of 24
Last
Go To
Page
  • 1
  • ...
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
24 of 24
Go To GO
Go to page of 24 pages
  • 1
  • ...
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

Top
Jaguar Forums - Jaguar Enthusiasts Forum
  • Contact Us
  • FAQ
  • Archive
  • Advertising
  • Cookie Policy
  • Privacy Statement
  • Terms of Service
  • Your Privacy Choices
  • Manage Preferences

© 2026 MH Sub I, LLC dba Internet Brands

Follow Us        



When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.