Hi, I am new to this forum and a first time new owner (12 months) of a 1962 MK2 3.4 RHD. I have had it lovingly restored inside and out and am looking for some information about the auto transmission switch that has a leak. It has a bakelite end on it and hasn't been removed yet as we haven't been able to locate a replacement. Located in Australia I have exhausted local 'expertise' and the parts suppliers (Aust & England) haven't seen one like this. Any information greatly appreciated and better still, where I can find a replacement. Thanks in advance.

switch on the transmission

 

Welcome to the Forums.

Dont remember one like that on my S Type, or the Daimler.

The members in the MK2 Tech Section may have answers.

Surprised SNG have no idea, but sometimes things go bang in the night.

Good luck.

 

Welcome to the forums eastgreen,

I've copied your question to MKI/MKII forum for advice from members with the same model. Here's the direct link to it:
https://www.jaguarforums.com/forum/m...ch-mk2-226878/

Follow this link https://www.jaguarforums.com/forum/m...40-daimler-61/ to the main MKI / MKII S type 240 340 & Daimler forum for help, advice and information. The 'HOW TO' thread at the top is a good place to start for information on regular issues.

Please add vehicle details to your Signature to help others to give relevant advice. Go to the User CP button on the left of the top menu bar, then Settings & Options under Your Control Panel. Select Edit Signature and enter the details.

You can also use the Australia - Victoria/Tasmania Region forum by following this link https://www.jaguarforums.com/forum/a...a-tasmania-94/ to find other members in your region.

Enjoy the forums.

Graham

 

Welcome to Jaguar Forums eastgreen,

Good to have you with us.
Enjoy the forum.

If you haven't done so already you should add your car details to your signature to help others to help you.
If you need help with getting around and using the forum follow this link for some help Forum Help

 

welcome to the forums - enjoy!!!

 

Hello,
I hope you fine a switch.
Welcome to the forums from ElinorB.
(';')

 

Welcome aboard.

 

Welcome. The members of the MKI / MKII S type 240 340 & Daimler Forum are a very sharp group. As indicated above, ask there and I suspect an answer will be forthcoming.

 

Welcome to the forums.

 

Hi, I have added my car details and contacted a suggested company (Welsh) as supplied by another member. I was surprised by the quick responses and how many in such a short time. Great forum, and I look forward to many more discussions. Lynne

 

Lynne,

Godd to hear you're making progress.

We're an International forum with large numbers of members in the USA, Europe and Australia. With that spread around the Time Zones, there's almost always someone, somewhere online to respond.

Graham