Xjs pre he help needed
Thread Starter
|
Junior Member
Joined: Jun 2016
Posts: 1
Likes: 0
Xjs pre he help needed
I am new to this site.
I have a 1978 xjs pre he with wiper problems.
Some wires are off the relay any help would be great appreciated
It is a 4 pin relay 30,85,86 and 87.
The wires are brown, black, white and a double white
Many thanks
Nick
I have a 1978 xjs pre he with wiper problems.
Some wires are off the relay any help would be great appreciated
It is a 4 pin relay 30,85,86 and 87.
The wires are brown, black, white and a double white
Many thanks
Nick
Veteran Member
Joined: Mar 2014
Posts: 26,738
Likes: 10,290
From: Tehama County, California, USA
Hello, Nick,
The members in our XJS section will be able to help you out with that relay. Someone will be along shortly to direct you there.
Welcome to the forums from ElinorB.
(';')
The members in our XJS section will be able to help you out with that relay. Someone will be along shortly to direct you there.
Welcome to the forums from ElinorB.
(';')
Senior Member
Joined: May 2016
Posts: 212
Likes: 39
From: Orpington, Kent,UK
Hi Nick. Sorry I do not have the schematics for your car but the relay I can tell you about.
Pin 30 is for the main feed (Brown) 85 is Earth (Black) Pin 86 is the signal (Stalk) and pin 87 is the Wipers. I would have said that the single white goes to the motor and the Two white would go to the stalk (for wiper speed).
Hope this helps
Roger
Pin 30 is for the main feed (Brown) 85 is Earth (Black) Pin 86 is the signal (Stalk) and pin 87 is the Wipers. I would have said that the single white goes to the motor and the Two white would go to the stalk (for wiper speed).
Hope this helps
Roger
Joined: Dec 2011
Posts: 120,439
Likes: 17,005
From: Durham, UK
Welcome to the forum Nick,
Good to have you with us at Jaguar forums.
Follow this link XJS ( X27 ) - Jaguar Forums - Jaguar Enthusiasts Forum to the XJS forum for help, advice and information. The 'HOW TO' thread at the top is a good place to start for information on regular issues.
Please remember to add vehicle details to your Signature to help others to give relevant advice. Go to the User CP button on the left of the top menu bar, then Settings & Options under Your Control Panel. Select Edit Signature and enter the details.
You can also visit the UK & Eire Region forum by following this link UK & Eire - Jaguar Forums - Jaguar Enthusiasts Forum to find other members in your region.
Enjoy the forums.
Graham
Good to have you with us at Jaguar forums.
Follow this link XJS ( X27 ) - Jaguar Forums - Jaguar Enthusiasts Forum to the XJS forum for help, advice and information. The 'HOW TO' thread at the top is a good place to start for information on regular issues.
Please remember to add vehicle details to your Signature to help others to give relevant advice. Go to the User CP button on the left of the top menu bar, then Settings & Options under Your Control Panel. Select Edit Signature and enter the details.
You can also visit the UK & Eire Region forum by following this link UK & Eire - Jaguar Forums - Jaguar Enthusiasts Forum to find other members in your region.
Enjoy the forums.
Graham
Joined: Apr 2012
Posts: 25,829
Likes: 4,701
From: Summerville, South Carolina
Trending Topics
Joined: Oct 2007
Posts: 120,988
Likes: 6,648
From: PHX some of the time
Welcome to Jaguar Forums Nick,
Good to have you with us.
Enjoy the forum.
If you haven't done so already you should add your car details to your signature to help others to help you.
If you need help with getting around and using the forum follow this link for some help Forum Help
Good to have you with us.
Enjoy the forum.
If you haven't done so already you should add your car details to your signature to help others to help you.
If you need help with getting around and using the forum follow this link for some help Forum Help
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)