S-Type / S type R Supercharged V8 ( X200 ) 1999 - 2008 2001 - 2009
Sponsored by:
Sponsored by:

I got some codes need a code reader!!!!

Thread Tools
 
Search this Thread
 
Old Nov 9, 2011 | 09:15 PM
  #1  
Precha's Avatar
Thread Starter
|
Member
Joined: Mar 2011
Posts: 60
Likes: 1
From: Arlington,Tx...
Unhappy I got some codes need a code reader!!!!

I am having trans issues and I took it to a trans shop to see whats up and he ran a check on it and it reads, brace yourself!
p0171 system too lean bank #1
p0174 bank #2
p0300 cyl misfire
p0301 cyl #1 miss fire
p0303 cyl #3 miss fire
p0305 cyl #5 miss fire
p1313 miss fire rate catalyst
damage bank #1
What do I need to do now?
 
Reply
Old Nov 10, 2011 | 01:21 AM
  #2  
JagV8's Avatar
Veteran Member
15 Year Member
Liked
Loved
Community Favorite
Joined: May 2009
Posts: 27,502
Likes: 4,901
From: Yorkshire, England
Default

All covered lots of times here, so use Search and plenty of help

Put in some time here and save $$$
 
Reply
Old Nov 10, 2011 | 01:35 AM
  #3  
Precha's Avatar
Thread Starter
|
Member
Joined: Mar 2011
Posts: 60
Likes: 1
From: Arlington,Tx...
Default

yes sir I am still up now I am bout to pull the snake in the garge and get ready for tommorow with all that is this my trans prob ..and I have to figure out what I need to replace as in coils,plugs,o-rings and intake gaskets... trans guy says he has seen these codes make the trans confused..
 

Last edited by Precha; Nov 10, 2011 at 01:40 AM.
Reply
Old Nov 10, 2011 | 02:59 AM
  #4  
JagV8's Avatar
Veteran Member
15 Year Member
Liked
Loved
Community Favorite
Joined: May 2009
Posts: 27,502
Likes: 4,901
From: Yorkshire, England
Default

See the FAQs, especially
 
Reply
Old Nov 10, 2011 | 05:26 AM
  #5  
joycesjag's Avatar
Veteran Member
15 Year Member
Liked
Loved
Top Answer: 1
Joined: Feb 2009
Posts: 8,020
Likes: 1,731
From: Sunny South Carolina
Default

Atleast you had taken it to a knowledgable and honest tranny guy. I agree with him.

Sounds like you have a major vacuum leak. The following link will point you in the right direction:

https://www.jaguarforums.com/forum/s...ics-faq-52720/
 
Reply
Old Nov 10, 2011 | 05:47 AM
  #6  
Norri's Avatar
Joined: Oct 2007
Posts: 120,984
Likes: 6,648
From: PHX some of the time
Default

Originally Posted by Precha
yes sir I am still up now I am bout to pull the snake in the garge and get ready for tommorow with all that is this my trans prob ..and I have to figure out what I need to replace as in coils,plugs,o-rings and intake gaskets... trans guy says he has seen these codes make the trans confused..
Good advice from the guys above, but this may be TMI.
 
Reply
Old Nov 10, 2011 | 07:58 AM
  #7  
Precha's Avatar
Thread Starter
|
Member
Joined: Mar 2011
Posts: 60
Likes: 1
From: Arlington,Tx...
Default

lol. yea I call it the snake and its a cat go figure.. I will get those o rings today...
 
Reply
Old Nov 11, 2011 | 03:06 PM
  #8  
Precha's Avatar
Thread Starter
|
Member
Joined: Mar 2011
Posts: 60
Likes: 1
From: Arlington,Tx...
Default

looking at the motor what are the clynder # (mis fire in 1.3.5.) where are they ..
 
Reply
Old Nov 11, 2011 | 03:23 PM
  #9  
tot's Avatar
tot
Member
Joined: Jan 2011
Posts: 70
Likes: 14
From: Cote d'Azur
Default

On 2003 cylinders 1, 3 and 5 are the right bank.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Will P
XJ XJ8 / XJR ( X308 )
62
Sep 19, 2018 08:36 AM
derek15301xjr
XJ XJ6 / XJR6 ( X300 )
31
Oct 20, 2015 07:39 PM
ssshield
New Member Area - Intro a MUST
8
Sep 24, 2015 08:29 PM
John Fox
XK8 / XKR ( X100 )
2
Sep 19, 2015 07:56 PM
jagfool
New Member Area - Intro a MUST
7
Sep 14, 2015 07:50 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 06:38 PM.