Is this ZF pan seal / gasket correct
No luck on searching the pan # and the gasket number is all over the place with some sites saying it fits and some saying it doesn't.
Your transmission is ZF6HP26. If your eBay listing indicated it's for that transmission, you should be good to go.
Your transmission is ZF6HP26. If your eBay listing indicated it's for that transmission, you should be good to go.
Thank you gentlemen for your reply’s. I had not seen a trans pan with an imbedded o ring seal before, always a gasket.
When I emailed seller he said if you want a gasket with the pan order ‘this one’ and gave me another listing.
I’ll use what I have. I was bit sckeptical so I also ordered a 26$ special order pan gasket from AUTOZONE.
It sounds as though I don’t need it.
When I emailed seller he said if you want a gasket with the pan order ‘this one’ and gave me another listing.
I’ll use what I have. I was bit sckeptical so I also ordered a 26$ special order pan gasket from AUTOZONE.
It sounds as though I don’t need it.
Thank you gentlemen for your reply’s. I had not seen a trans pan with an imbedded o ring seal before, always a gasket.
When I emailed seller he said if you want a gasket with the pan order ‘this one’ and gave me another listing.
I’ll use what I have. I was bit sckeptical so I also ordered a 26$ special order pan gasket from AUTOZONE.
It sounds as though I don’t need it.
When I emailed seller he said if you want a gasket with the pan order ‘this one’ and gave me another listing.
I’ll use what I have. I was bit sckeptical so I also ordered a 26$ special order pan gasket from AUTOZONE.
It sounds as though I don’t need it.
Did you buy the kit with fluid/pan/filter? I would be most concerned about the fluid as I read there is plenty of counterfeit ZF fluid on the market.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
BStopek
S-Type / S type R Supercharged V8 ( X200 )
7
Mar 3, 2013 11:30 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)









