JimC64
Veteran Member
close
- Join DateNov 2006
- LocationGlasgow, Scotland UK
- Posts:47,291
-
Likes:7,473
-
Liked:9,029 Times in 4,120 Posts
Ok, so probably like a few here with the bigger rims I have an issue with my 20" Callisto alloys
They're in good shape ( good not great, but still good ) as regards the finish, but....
After checking brakes ( all seem good ) front suspension and rear suspension all done, tyres all seem ok, I suspect that my wheels may be a little buckled.......nothing to really see but on a balancer or car on a lift with engine running there is a slight movement.
My guess is at around 70mph or maybe a little more somtimes that is amplified significantly, so today, I went to visit Wheelpro Scotland...
They're based in Easterhouse just off the M8 Jcntn 9 near Real Radio, and also have branches in the West of Glasgow and Edinburgh.
They're going to straighten or ( round out ) my wheels and do a FULL refurb on them, stripping them right back then applying the finish after being reworked, for a very good price!!
There's so many combinations they can offer it'll make you dizzy....lol
I'm going for a hyper silver on mine, with a nice metallic flake...
They also had this in for a customer as they also offer hydro dipping....wow

If you ever contact them, ask for Gary and mention my name or Jaguarforums for perhaps a little discount....
Booked in for Friday 18th
They're in good shape ( good not great, but still good ) as regards the finish, but....
After checking brakes ( all seem good ) front suspension and rear suspension all done, tyres all seem ok, I suspect that my wheels may be a little buckled.......nothing to really see but on a balancer or car on a lift with engine running there is a slight movement.
My guess is at around 70mph or maybe a little more somtimes that is amplified significantly, so today, I went to visit Wheelpro Scotland...
They're based in Easterhouse just off the M8 Jcntn 9 near Real Radio, and also have branches in the West of Glasgow and Edinburgh.
They're going to straighten or ( round out ) my wheels and do a FULL refurb on them, stripping them right back then applying the finish after being reworked, for a very good price!!
There's so many combinations they can offer it'll make you dizzy....lol
I'm going for a hyper silver on mine, with a nice metallic flake...
They also had this in for a customer as they also offer hydro dipping....wow

If you ever contact them, ask for Gary and mention my name or Jaguarforums for perhaps a little discount....
Booked in for Friday 18th
JimC64
Veteran Member
close
- Join DateNov 2006
- LocationGlasgow, Scotland UK
- Posts:47,291
-
Likes:7,473
-
Liked:9,029 Times in 4,120 Posts
Hey MarcB, Having them painted in Hyper Silver ( a mettalic with plenty of flake )
Currently they're in the flat look finish and I'm not overly keen.
Its more to try and get them straightened out, or should I say rounded as they have a few very slight buckles here n there I'm hoping to get fixed for a smoooother ride
Currently they're in the flat look finish and I'm not overly keen.
Its more to try and get them straightened out, or should I say rounded as they have a few very slight buckles here n there I'm hoping to get fixed for a smoooother ride
Senior Member
Got it, I just had eight Callistos repaired, two were cracked but true (odd as they seem very structurally sound, but the metal is brittle) It appears the dealer I purchased the car from had the wheels painted as a "touch up" but the spare was in its original polished state but very curbed. I picked three up off of eBay which the previous owner had powdercoated matte gray. To each his own, but yuck!
I had them fully polished, face and barrel, and I have to say IMHO they look great.
I had them fully polished, face and barrel, and I have to say IMHO they look great.
JimC64
Veteran Member
close
- Join DateNov 2006
- LocationGlasgow, Scotland UK
- Posts:47,291
-
Likes:7,473
-
Liked:9,029 Times in 4,120 Posts
Thanks marcB...........I agree they look really nice andset the car off for sure.
Cambo

close
- Join DateJan 2011
- LocationSydney, Australia
- Posts:8,637
-
Likes:937
-
Liked:4,525 Times in 2,445 Posts
Quote:
Sorry to go off topic, but that is one low Super V8 Portfolio!Originally Posted by MarcB
.....I have to say IMHO they look great.
Do you drive it around at that ride height? Must be nightmare, especially in long wheelbase...
Senior Member
Quote:
Do you drive it around at that ride height? Must be nightmare, especially in long wheelbase...
Yes it is but this particular picture is a bit of an optical illusion, as it is about 1.5 inches (38mm) lower than factory spec. No issues with clearance anywhere yet and I've put about 10k miles on it all over the West coast of the U.S. since it was done.Originally Posted by Cambo351
Sorry to go off topic, but that is one low Super V8 Portfolio!Do you drive it around at that ride height? Must be nightmare, especially in long wheelbase...
JimC64
Veteran Member
close
- Join DateNov 2006
- LocationGlasgow, Scotland UK
- Posts:47,291
-
Likes:7,473
-
Liked:9,029 Times in 4,120 Posts
Ok so the wheels are done, pretty nice too.....
A shadow silver, with a little shine that doesn't seem to show too well in the pics...oh well!


Had a few runs in her at speed at the steering wobble is definitely improved somewhat too.
A shadow silver, with a little shine that doesn't seem to show too well in the pics...oh well!


Had a few runs in her at speed at the steering wobble is definitely improved somewhat too.
sklimii

close
- Join DateApr 2012
- LocationSummerville, South Carolina
- Posts:25,844
-
Likes:3,669
-
Liked:4,707 Times in 4,011 Posts
they turned out quite nice!!!
JimC64
Veteran Member
close
- Join DateNov 2006
- LocationGlasgow, Scotland UK
- Posts:47,291
-
Likes:7,473
-
Liked:9,029 Times in 4,120 Posts
Hi Black Cat, sorry, mine were sold as a set, long gone
Have you tried Ebay / Craigslist etc?
Have you tried Ebay / Craigslist etc?
Junior Member
Hey Marc, my name is Martin. I am new to this forum. I have a 2006 Super V8 Portfolio with wheels just like yours. I see in this old post that you had them refurbished and am trying to learn more about that. I see lots of people having them power coated but I don't want to do that, as currently they are polished aluminum with some type of clear coating, and I cant' find someone to do the work.
Regards,
Martin H
Regards,
Martin H
Quote:
I had them fully polished, face and barrel, and I have to say IMHO they look great.
Originally Posted by MarcB
Got it, I just had eight Callistos repaired, two were cracked but true (odd as they seem very structurally sound, but the metal is brittle) It appears the dealer I purchased the car from had the wheels painted as a "touch up" but the spare was in its original polished state but very curbed. I picked three up off of eBay which the previous owner had powdercoated matte gray. To each his own, but yuck!I had them fully polished, face and barrel, and I have to say IMHO they look great.
GGG

close
- Join DateDec 2011
- LocationDurham, UK
- Posts:120,439
-
Likes:7,142
-
Liked:17,009 Times in 12,222 Posts
Quote:
Regards,
Martin H
Welcome to the forums Martin,Originally Posted by 2006portfolio
Hey Marc, my name is Martin. I am new to this forum. I have a 2006 Super V8 Portfolio with wheels just like yours. I see in this old post that you had them refurbished and am trying to learn more about that. I see lots of people having them power coated but I don't want to do that, as currently they are polished aluminum with some type of clear coating, and I cant' find someone to do the work.Regards,
Martin H
MarcB was last on the forum in April 2018 so you are unlikely to receive a reply. However, posting your phone number and eMail address on a public forum is an absolute guarantee you will get plenty of replies from spammers everywhere. I've removed these details for your privacy.
Please follow this link New Member Area - Intro a MUST - Jaguar Forums - Jaguar Enthusiasts Forum to the New Member Area - Intro a MUST forum and post some information about yourself and your vehicle for all members to see. In return you'll get a proper welcome and some useful advice about posting to the forum.
Graham








