Tech help please - rear caliper rebuild
#1
Tech help please - rear caliper rebuild
I just spent the last half hour fighting this and know there has to be an easy way. I know the piston seal goes into the lower cylinder slot first. I'm assuming the dust seal has to go into the upper cylinder slot next, and then the piston slipped into the dust seal and finally pressed into the lower seal. I've either got it wrong or simply have too many thumbs. Any help would be appreciated.
#2
I just spent the last half hour fighting this and know there has to be an easy way. I know the piston seal goes into the lower cylinder slot first. I'm assuming the dust seal has to go into the upper cylinder slot next, and then the piston slipped into the dust seal and finally pressed into the lower seal. I've either got it wrong or simply have too many thumbs. Any help would be appreciated.
https://m.flickr.com/#/photos/28864200@N02/sets/72157653705035250/
Pics say more than words.
The following 2 users liked this post by Daim:
Don B (08-30-2015),
Doug Dooren (08-30-2015)
Thread
Thread Starter
Forum
Replies
Last Post
metalmarty
XJ XJ6 / XJ8 / XJR ( X350 & X358 )
9
09-11-2015 07:05 AM
philwarner
XJ6 & XJ12 Series I, II & III
16
09-05-2015 10:05 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)