So I need to drive the codes out so I can get a SMOG cert on my 2004 Jaguar S Type V8. I was told to drive 100 miles however I still do not get the magic test complete code.
Does anyone know the steps to get a service complete code? ie 0-35mph, 0-45mph, turn on all lights, back up 15 feet...
Thank you

 

The drive cycle is in the codes PDF, free download from stickies & in JTIS.

You also need to have the right conditions for some monitors (e.g. EVAP needs fuel between say 15-85% and a cold stand overnight).

But it all only works if there are no faults stopping the monitors setting. Once you've cleared the codes you can (unusually) have faults that can't be flagged but also stop the monitors. Hope that's not you...

 

I found the codes document however I did not see the driving instructions.
Is there a direct link to the file that includes the driving instructions?
thanks again.

 

The procedures are in the first ten pages.

http://jagrepair.com/images/AutoRepa..._OBD_II_R2.pdf

 

I noticed this manual is for the 2003 S Type, will it work for a 2004 model year as well?

 

You're over-thinking it!

It's good enough.

When you've done it & the EVAP-stuff, if the monitors don't all set then post which one(s) haven't.

 

No check engine light ccm and evap monitors needs to be clear

 

P1000 now what?

 

You mean set.

Search on evap monitor and probably find CCM as well, can be awkward to set. If you've faults (incl. pending) then they can be the cause.