When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
My car is in a no start and no turn over situation and I get a two flash followed by four when I hook up a reader or keep the key in the start position for 10 seconds. Is there more to this students guide that might have the signals listed?
My car is in a no start and no turn over situation and I get a two flash followed by four when I hook up a reader or keep the key in the start position for 10 seconds. Is there more to this students guide that might have the signals listed?
Your best bet is to use jaguar SDD130 software with the dedicated Jaguar interface to diagnose the fault.
In fact this is best with any faults on the S-type.
The problem is it is a bit complicate to set up.
Sadly you will find that most Jaguar dealers do not have this early version of the software any more and later versions do not work on the S-type.
Mellow
Last edited by M-e-l-l-o-w; Dec 17, 2019 at 03:50 AM.
My car is in a no start and no turn over situation and I get a two flash followed by four when I hook up a reader or keep the key in the start position for 10 seconds. Is there more to this students guide that might have the signals listed?
Yes, I'll double check today and take a video if it is still 2-4. I can upload it somewhere and post a link. Maybe I can get it done before the light comes up fully.
